Congratulations to Tyler Albright for winning third place in the best student paper competition at this year's SPIE Smart Structures / NDE Conference in Denver, CO. Our paper was titled "Stochastic modeling of strain and fatigue sensing elements". Thanks to Dr. John Domann for organizing the competition.
It's always good to catch up with old friends at conferences. Here we took the opportunity to get a SOD (Students of Dan Inman) beard picture.
Dr. Hobeck traveled to Iowa State University to meet with Dr. Alipour and her team. The meeting marked the official kickoff for a 3-year National Science Foundation funded project that will be a collaborative effort between KSU and ISU. The project focuses on developing a smart morphing façade (smorphaçade) system that will adapt with changing wind conditions in order to mitigate wind-induced vibrations in tall buildings. Photo: (left-to-right) Behrouz Shafei, Jared Hobeck, Partha Sarkar, Alice Alipour. Photo credit: Christopher Gannon, ISU photographer.
The MSL has undergone major changes in recent weeks. The materials testing hardware donations described in an earlier post was installed and is now operational. Moving the 1 ton load frame to the 2nd floor lab was no easy task. However, our group put our minds and muscles to the test and made the move seamless! The top left image shows the load frame in the Rathbone Hall elevator. The top right image shows the group handling the freight containing the MTS hydraulic pump used to power the load frame. The bottom images show the load frame in its fully upright position in the MSL. The lab setup was significantly modified to accommodate this huge frame! Peek in the MSL window at 2087 Rathbone Hall to see our new hardware!
We would like to sincerely thank Phillips-Medisize for their generous donation of an MTS 810 load frame system to MSL in the Mechanical and Nuclear engineering department at Kansas State University. The donated equipment serves as an essential upgrade to our material testing capabilities and will meet urgent needs spanning multiple aspects of our mission both in research and education.
Yesterday the MSL unboxed a brand new ultrasonic processor! The high shear mixing capabilities of this homogenizer is perfect for the dispersion of nanoparticles in a semi-viscous media such as an uncured thermosetting polymer. It can also be used to disperse the sugar granules in your morning coffee, but you definitely want to sanitize the probe before submerging it in your drink!
This week Professors and students from the MSL and the Nanomaterials and Characterization Lab worked together in preparing the previous MTEL lab for new flooring! This preparation involved the relocation of various lab equipment, storage units, and heavy testing equipment.
The images above show the relocation process for the largest tensile testing unit in the lab. This unit is capable of applying a tensile force of 55 kip while weighing just a little less than 1 ton!
This pair of images shows a before and after view of the space. Now it's time for renovations. Special thanks go out to all those who assisted in the cleanup as well as those who took extra care to ensure the safety of the helpers.
Smells like fresh paint! Facilities completed painting a K-State purple accent wall in our lab today.
Setting up all 3500 lbs of the MOAT (Mother of all Tables) was a group effort, but we got it done. This is a 5'x12'x18" Newport optical table that is self leveling and floats on air to help isolate vibration. Pretty neat! Thank you, Professor Leseman and his students for the extra muscles.